File Name Type Version Date Notes
1166 User Guide
Download
Icon 2.00 December 19, 2022

User Guide for the 1166 Rugged Bluetooth® UHF RFID reader

Application Note - Battery Use and Storage
Download
Icon 1.01 December 15, 2022

To maximise the battery life of TSL® Readers, the recommendations included in this document should be observed by both customers and distributors/resellers of TSL® products.

Installing the Desktop USB Driver
(Please login to download this file.)
Icon 1.02 July 29, 2019

To connect a TSL® Reader to a desktop PC via a USB connection, the necessary Virtual COM Port (VCP) drivers must be downloaded from http://www.ftdichip.com/Drivers/VCP.htm. On that page you can select the appropriate 'setup executable' for your operating system, which will install the drivers for you.

Comparison of Bluetooth® modes for TSL® Readers
(Please login to download this file.)
Icon 1.02 July 29, 2019

This document provides a comparison of the two available modes of operation (SPP and HID) using Bluetooth® Wireless Technology.

Locating Assets with TSL's Tag Finding Mobile Apps
(Please login to download this file.)
Icon 1.02 January 2, 2019

This document provides details of how to rapidly locate hard to find tagged items using TSL’s tag-finding Apps such as 'RFID Tag Finder' (available for Android™ and Windows Phone) or the Find-a-Tag feature in 'RFID Explorer for iOS'.

User Guide - UHF Smart Wedge ASCII 2 .NET for Windows Desktop
(Please login to download this file.)
Icon 1.0 December 16, 2017

User Guide for UHF Smart Wedge ASCII 2 .NET for Windows Desktop.

UHF Smart Wedge ASCII 2 is a solution that converts UHF transponder reads and barcode scans from TSL® ASCII Protocol UHF readers into keyboard presses. This enables UHF and barcode data to be scanned into legacy applications without any changes to the application.

Downloading Firmware to a TSL ASCII Protocol Reader
(Please login to download this file.)
Icon 1.0 May 24, 2017

The document describes the process of updating firmware to a TSL ASCII Protocol Reader.

RFID Web Wedge User Guide
(Please login to download this file.)
Icon 1.2 March 16, 2016

RFID Web Wedge is designed to insert RFID (or bar-code) data into Web Applications

Using the EPC filter in TSL Mobile Apps
(Please login to download this file.)
Icon 1.0 June 22, 2015

TSL’s mobile Apps now provide a feature to restrict the tags that are detected and displayed when performing an RFID scan. This can be used to ensure that only tags of interest to the user are detected and counted. This document details how to specify the EPC filter in TSL's mobile Apps.

Pairing TSL® Readers to Windows 8.1 Desktop
(Please login to download this file.)
Icon 1.1 December 8, 2014

This document describes how to pair a TSL® Reader to a Windows 8.1 desktop computer via Bluetooth® wireless technology. The process is similar for other desktop computers.

    File Name Type Version Date Notes
    TSL PC Firmware Downloader
    (Please login to download this file.)
    Icon 1.27 June 25, 2021

    Version 1.27 Fix for 2173 Bluetooth reset after download

    ASCII 2 Protocol Explorer for Windows Desktop
    (Please login to download this file.)
    Icon 1.8 April 13, 2017

    Updated to support the ASCII protocol v2.4.
    The install is now digitally signed.

    UHF Smart Wedge ASCII 2 .NET for Windows Desktop
    (Please login to download this file.)
    Icon 1.20 October 10, 2016

    UHF Smart Wedge ASCII 2 is a solution that converts UHF transponder reads and barcode scans from TSL® ASCII Protocol UHF readers into keyboard presses. This enables UHF and barcode data to be scanned into legacy applications without any changes to the application.

    v1.20 fixes a number of issues including reading from user memory

    The User Guide can be downloaded here.

      File Name Type Version Date Notes
      TSL ASCII Protocol 2.5 Rev A
      (Please login to download this file.)
      Icon 2.5 Rev A May 7, 2019

      Added and updated many new Response Field Headers and Commands.

       

      TSL ASCII Protocol 2.4 Rev B
      (Please login to download this file.)
      Icon 2.4 Rev B November 16, 2017

      Added –e option to the .bt command

      TSL ASCII Protocol 2.4 Rev A
      (Please login to download this file.)
      Icon 2.4 Rev A April 20, 2016

      This document describes the Technology Solutions ASCII 2.4 protocol. The commands and their parameters are detailed along with the responses. Each command has a few examples to aid understanding. The commands all have default parameters and most can be used without change.

      File Name Type Version Date Notes
      TSL® ASCII 2 SDK For Android™ - Supporting Devices Running Android 12 or Greater
      (Please login to download this file.)
      Icon January 27, 2023

      Starting with Android 12 (API31), there is a requirement for many App permissions to be obtained from the user at run-time. By following the advice provided in this document, owners of the latest Android devices can continue to enjoy using your RFID App with their TSL® RFID Reader. 

      Application Note - Battery Use and Storage
      Download
      Icon 1.01 December 15, 2022

      To maximise the battery life of TSL® Readers, the recommendations included in this document should be observed by both customers and distributors/resellers of TSL® products.

      Application Note - Changing the Bluetooth® Mode of a TSL® Reader
      (Please login to download this file.)
      Icon 1.01 July 29, 2019

      TSL® Readers can be operated in Bluetooth® SPP mode where the Reader is controlled by a custom written application or in HID mode, where the Reader behaves like a Bluetooth® Keyboard. This document details how to switch between these modes.

      Application Note - Bluetooth® HID Mode
      (Please login to download this file.)
      Icon 1.04 July 29, 2019

      The TSL® range of Bluetooth® Readers are able to appear to host devices as an HID keyboard. In this mode the data read by the reader is sent to the host as if it were typed on the host’s keyboard.  This document describes the Bluetooth® HID mode in more detail.

      Application Note - Using the Micro SD Log and Autorun Files
      (Please login to download this file.)
      Icon 1.02 July 29, 2019

      This document details Log file and Autorun file commands/responses that can be used with TSL®  Readers with a micro-SD card installed.

      Application Note - Selecting, Reading and Writing Transponders with the TSL ASCII 2 Protocol
      (Please login to download this file.)
      Icon 1.33 April 24, 2017

      This document recaps the behaviour and operation of UHF transponders with respect to selecting, reading and writing, and provides some examples of how to achieve this with the TSL ASCII 2 Protocol.

      Application Note: Modifying the EPC of a Transponder Using RFID Explorer
      (Please login to download this file.)
      Icon 1.0 March 7, 2017

      It is often necessary to change the existing EPC of a tag to a new value to support either standards-based or custom encoding formats. This document provides examples of how to modify the EPC identifier using the TSL RFID Explorer App.

      Application Note: Modifying the EPC of a transponder
      (Please login to download this file.)
      Icon 1.0 January 18, 2017

      It is often necessary to change the existing EPC of a tag to a new value to support either standards-based or custom encoding formats. This document provides examples of how to modify the EPC identifier using the TSL ASCII 2 protocol.

      Application Note – Bluetooth® Auto-Reconnect Mode
      (Please login to download this file.)
      Icon 1.0 January 3, 2017

      Information on enabling Bluetooth® Auto-Reconnect Mode on iOS Devices.

      1166 Firmware History
      (Please login to download this file.)
      Icon 1.0 December 19, 2016

      Document detailing the firmware version history of the 1166 Bluetooth® Rugged UHF RFID Reader

        File Name Type Version Date Notes
        ASCII Remote Diagnostic (Windows)
        (Please login to download this file.)
        Icon 2.5 March 14, 2024

        This Windows application connects to a TSL® RFID Reader (via a USB connection) in order to generate diagnostic information that can be emailed to our Support team. The Virtual COM Port driver must be installed in order for this application to function correctly.

          File Name Type Version Date Notes
          1166_FW_V2.2.0.PFF
          (Please login to download this file.)
          Icon 2.2.0 October 14, 2022

          2.2.0:

          Added new regulatory regions Chile (cl) and Colombia (co)

          1166_FW_V2.1.9.PFF
          (Please login to download this file.)
          Icon 2.1.9 August 1, 2022

          2.1.9:

          Fixed issue with reduced output power being ignored

          1166_FW_V2.1.8.PFF
          (Please login to download this file.)
          Icon 2.1.8 January 7, 2022

          2.1.8:

          Fixed charging issue with latest battery pack

          Added new region Pakistan (pk)

          Minor internal changes

           

          1166_FW_V2.1.5.PFF
          (Please login to download this file.)
          Icon 2.1.5 July 5, 2021

          2.1.5:

          Extended offset value for read commands for extended addressing

          Added new regions Singapore (sga), Bangladesh (bd), Libya (ly)

          Updated region Japan (jp)

           

          1166_FW_V2.1.1.PFF
          (Please login to download this file.)
          Icon 2.1.1 August 21, 2019

          2.1.1:

          Added missing QT: header for .rd -qm3
          Added HID substrings

          2.1.0:

          Added custom region for Indonesia (id)

           

          1166_FW_V2.0.9.PFF
          (Please login to download this file.)
          Icon 2.0.9 June 28, 2019

          2.0.9:

          Fixed long-standing bug where incorrectly formatted AUTO.TXT could cause reader to hang

          2.0.8:

          Added custom region for Brunei (BN)

          2.0.7:

          Added custom region for Vietnam (VN)

          2.0.4:

          Added new notifications sounds (cf 2128)
          Added volume options on .al command
          Added phase PH: reports to .iv & .rd
          Added channel CF: reports to .iv & .rd
          Added “AS: XXX-Internal” reports to .vr
          Added custom region for Albania (DZ)

          Improvements, optimisations and bug fixes

          1.4.0:

          Added HII keyboard toggle (cf 1128)
          Added new Serial HID (.sh) command
          Added new Autorun (.ar) command
          Added Egypt region (EG)

           

          1166_FW_V1.3.1.PFF
          (Please login to download this file.)
          Icon 1.3.1 April 3, 2018

          1.3.1:

          Added BlockPermalock command (.bp )

          Added barcode engine poll at startup to reduce boot delay (7s -> 2-3s, Motorola only)

          Added extra startup beeps for HID (one extra) and HII (two extra)

          Added reset of Bluetooth reconnect mode on .bt -m

          Minor bug fixes


          ***Please Note****  TSL PC Firmware Downloader v1.13 or higher is required to load this firmware. Please also see Application Note – Downloading Firmware and 1166 Firmware History.

          Downloading Firmware to a TSL ASCII Protocol Reader
          (Please login to download this file.)
          Icon 1.0 May 24, 2017

          The document describes the process of updating firmware to a TSL ASCII Protocol Reader.

          1166 Firmware History
          (Please login to download this file.)
          Icon 1.0 December 19, 2016

          Document detailing the firmware version history of the 1166 Bluetooth® Rugged UHF RFID Reader

            File Name Type Version Date Notes
            RFID Explorer 2 - Android
            (Please login to download this file.)
            Icon 2.15.0 February 19, 2024

            v2.15.00

            Support has been added for the upcoming 3166 RAIN RFID UHF Reader including control of the various Reader RF Modes, faster ePop-Loq speed and support for Magnus S3-based temperature sensor tags.

            For all TSL Readers:

            The Read/Write screen has seen an update to allow tags to be selected based on the TID or User memory banks, in addition to the EPC memory bank.

            The Inventory screen has had a refresh with improved responsiveness.

            RFID Scan Scan Write
            (Please login to download this file.)
            Icon 3.8.3 February 2, 2022

            Version 3.8.3

            • BugFix: SGTIN-96 Indicator digit now displayed in the confirmation message (encoding has always been correct)

            Version 3.8.2

            • Android: Updated to target Android 10 SDK (API 29)
            TSL® Reader Configuration
            (Please login to download this file.)
            Icon 1.3.3 February 1, 2022

            Version 1.3.3

            • Restored the Data Matrix Mirror option - displays 'Cannot be changed' when it is not supported
            • Added support for 212P & 2128L
            • Improved 2173 images.

            v1.3.1

            • Added option for Inverse 1D barcode setting
            • Removed obsolete Data Matrix Mirrored setting
            • Added support for new readers 2173 & 2166
            • UI improvements
            • Minor bug-fixes

            v1.2.0

            • For ePop-Loq and USB OTG connected Readers:
              • the Reader will automatically connect when attached
              • the Option screen now includes controls to switch between SPP and HID modes.
            •  
            • The Reader clock can now be reset to the current time from the Options screen.
            • The Options page now provides the ability to change the mode of the ePop-Loq connector on compatible Readers.
            • The Select Reader screen list now provides images of available Readers.
            RFID Tag Finder Android
            (Please login to download this file.)
            Icon 1.5.0 January 8, 2019

            v1.5.0

            This release is about connecting!

            • Support for ePop-Loq readers - snap your ePop-Loq cased terminal onto the TSL Reader and you are ready to go!
              For Bluetooth connections, turn the TSL Reader on and :
              • tap the phone/terminal on the Reader's NFC logo or
              • scan the TSL Reader's QR code using the dedicated scanner built-in to the Honeywell/Zebra/Datalogic terminal
            • Finally, RFID Tag Finder can now be configured using an Intent - see Help for details.
              File Name Type Version Date Notes
              TSL ASCII2 Software Development Kit – for Android™
              (Please login to download this file.)
              Icon 2.6.0 January 19, 2023

              This release introduces an observable connection stateChangedEvent on the AsciiCommander, as replacement for the existing LocalBroadcastManager (which is a deprecated Android API).

              The LocalBroadcastManager support remains in this release to allow developers time to transition to the new approach.

              The Inventory project has been updated to demonstrate the new connection stateChanged events

              This release also addresses an issue that caused barcodes to be truncated when they contained line terminators 0x0D or 0x0A.

              The Rfid.AsciiProtocol JavaDocs have also been updated to provide searchable content.

              TSL ASCII 2 Software Development Kit – for Xamarin .NET Standard Development
              (Please login to download this file.)
              Icon 2.1.0 November 28, 2022

              This release provides compatibility with the Google 2022 API requirements for Android (API Level 31).

              The sample project in the SDK release has been updated to use the Tsl.AsciiProtocol v1.6.0 NuGet package – which is required when targeting API level 31+.

              When Android 12+ or later is targeted, the following permissions must be both declared in the AndroidManifest.xml and obtained at runtime:

              • Manifest.Permission.BluetoothConnect
              • Manifest.Permission.BluetoothScan

              Until these runtime permissions are obtained from the user, no Bluetooth® devices will be available.

              We provide an example of how to obtain these permissions in the Sample.Connections.Forms.Android sample project.

              TSL ASCII 2 Software Development Kit – for iOS
              (Please login to download this file.)
              Icon 1.6.1 July 8, 2021

              The v1.6.0 release of the TSL iOS SDK is here! With a new FindTag Sample project (implemented in Swift/SwiftUI) and an updated framework supporting ASCII Protocol 2.5, this release is a significant upgrade to our iOS SDK.

              New commands include:
              TSLFindTagCommand (for series 21xx Readers) - controls the Reader's tag finder operation
              TSLBlockPermalockTransponderCommand - to allow tags to be block permalocked
              TSLAutorunCommand - allows the SD-Card's 'auto.txt' file to be read, written or deleted.

              The latest TSLAsciiCommands framework is now available in the new XCFramework format for Xcode 12 users. We have also audited the API to improve type-safety in Swift apps.

              Finally, the included documentation has been completely overhauled and now provides a fresh, modern look, an updated 'Getting Started' section, improved enum type documentation and both ObjC and Swift interfaces for all commands.

              *The v1.6.1 update provides XCFramework ObjC project compatibility and minor documentation updates.

              Developer Resources
              (Please login to download this file.)
              Icon 1.1 March 25, 2020

              The Developer Resources Pack contains images of our readers, for use in applications developed to support our readers.   

              Terms of Use
              The images in this bundle and the rights pertaining to them, including copyright and ownership, are the sole and exclusive property of Technology Solutions (UK) Ltd 2020.  The images in this bundle are only provided for use in Mobile or Desktop applications that connect to the TSL Reader depicted in the image. No other use is authorised.

              TSL ASCII 2 Software Development Kit – for Xamarin
              (Please login to download this file.)
              Icon 1.2 July 18, 2019

              The v1.2 release of the TSL cross-platform, Xamarin SDK (for PCL-based projects) is now available. This release uses the Tsl.AsciiProtocol PCL library v1.3.6 (available via NuGet) which contains many new features including:

              • Full support for ASCII Protocol 2.5 - including the new FindTagCommand to simplify the implementation of tag finding.
              • USB support for UWP-based projects
              • A new connection mechanism (AsciiTransportsManager) while retaining ReaderConnectionManager to maintain full backwards compatibility with existing projects.
              • Sequencing of synchronously executed ExecuteCommand() calls to eliminate cross thread "Command is already executing" exceptions
              • New Bluetooth pairing support via the BluetoothSecurity class
              • HostBarcodeHandler a helper class to initiate a barcode scan on the terminal from reader trigger for supported terminals

              The Sample Projects, in this release, have all been updated to demonstrate USB support for UWP Apps and fix minor bugs. The new, cross-platform, .NET Standard SDK will be released shortly and we recommend that it is used for all new projects.