The 1136 4-Slot Battery Charger is compatible withstandard ‘L’ and high-capacity ‘XL’ EasyPack™ batteries. The charger senses the inserted batteries and adjusts its charge rate accordingly. There is an individual charge status LED for each battery slot in addition to a main power supply status LED.
Included are two battery retaining clips that can be adjusted in position to accommodate the two sizes of battery.
**Power Supply not included** – Requires a Motorola PSU (50-14000-148R, PWRS-14000-148R or PWRS-14000-148C) and an IEC mains lead.
1136-01-4WMS-CHG – 4-Slot Battery Charger
Compatible Power Supply Must be used with Motorola PSU 50-14000-148R, PWRS-14000-148R or PWRS-14000-148C and an IEC mains lead Compatible Batteries EasyPack™ L Rechargeable Li-Polymer battery EasyPack™ XL Rechargeable Li-Polymer battery Charge time Varies depending on the type and number of batteries, typical 150 minutes with a single EasyPack L to 360 minutes with four EasyPack XL.
Dimensions (maximum) 110mm (w) × 110mm (d) × 85mm (h) Drivers (without battery retainer clips) 110mm (w) × 110mm (d) × 41mm (h) Weight (excluding optional steel base) 180g (6.4 oz) Enclosure material GE Lexan Polycarbonate Colour Grey with black battery retainer clips. Material finish Sparked surface User indication Individual charge status indicator for each battery slot. Power on indicator
Operating Temperature 5°C to 40°C
(41°F to 104°F)
Storage Temperature -40°C to +70°C
(-40°F to 158°F)
Humidity Up to 90% Relative humidity Non Condensing Drop specification 76.2cm (30 inch) drops to vinyl tiled concrete at room temperature. Electrostatic discharge +/-15kV air discharge, +/-8kV direct discharge Construction RoHS compliant
EMI/RFI EN 61000-6-3:2007+A1:2011, EN 61000-6-1:2007
Title 47 of the CFR:2010, Part 15 Subpart (b)
ICES-003 Issue 4:2004
Electrical Safety IEC 60950-1
CAN/CSA-C22.2 No. 60950-1-07
design • development • manufacture