testproductpage
Physical and Environmental Characteristics
Dimensions (LxWxH):
10.2 cm x 5.5 cm x 5.6 cm.
Weight (inc battery):
157 g / 5.5 oz.
User input:
Two Trigger buttons.
User feedback:
Speaker, vibration motor, three LEDs.
Power:
Removable, rechargeable 3.7 volt Lithium Polymer 1130 mAh battery pack, 4.2 watt hrs.
Enclosure materials:
Polycarbonate.
Performance Characteristics
RFID engine:
AMS AS3993 based.
Communication protocols:
TSL® ASCII 2.0 parameterised command set.
Memory:
Optional Micro SD card (maximum 32GB capacity supported). Up to 500 million date and time stamped EPCs can be stored on a 32GB Micro SD card (separate purchase from alternative supplier).
Compatible Host devices (Bluetooth®):
Any Bluetooth® Host1 supporting the Serial Port Profile (SPP) or Human Interface Device (HID) profile (Android, iOS, Linux, Mac, Windows). Comparison of Bluetooth® modes for TSL® UHF Readers.
Compatible Host devices (USB):
Any USB host with FTDI VCP driver support (Windows, Linux, Mac, Android).
Environmental
Operating Temp.:
-10°C to 40°C (14°F to 104°F).
Charging Temp.:
5°C to 40°C (41°F to 104°F).
Storage Temp.:
Less than 1 month at at -20 to +60°C (-4°F to 140°F).
Less than 3 months at -20°C to +45°C (-4°F to 113°F).
Less than 1 year at -20°C to +30°C (-4°F to 86°F).
Humidity:
5% to 85% non-condensing.
Drop Spec:
Multiple drops to concrete: 4 ft./1.2 m ambient, 3ft / 0.9m across the operating temperature range.
Tumble:
500 0.5 metre tumbles at room temperature (1,000 cycles).
Environmental Sealing:
IP54.
Electrostatic Discharge (ESD):
± 15kVdc air discharge; ± 8kVdc contact discharge.
MIL-STD 810F:
Meets and exceeds applicable MIL-STD 810F for drop, tumble and sealing.
RFID Performance
Standards supported:
EPC Class 1 Gen 2.
Nominal read range2:
up to 6.5 ft./up to 2 m.
Nominal write range2:
up to 3.3 ft./up to 1 m.
Field:
150-degree forward facing (approx.) measured from front of device.
Antenna:
Internal Circularly Polarized.
Frequency Range:
EU: 865-868MHz; US: 902-928MHz.
Maximum Output Power:
Up to 25 dBm (region dependant)
+ 1.0 dBiC Antenna
Barcode Scanning
Imager:
2D imager.
Sensor Resolution:
752 x 480 pixels.
Field of View:
Horizontal: 40°, Vertical: 25°.
Focal Distance:
SR: 8 in. DL: 5.3 in. HD: 2.9 in.
Aiming LED (VLD):
655 ±10 nm Laser.
Illumination Element:
625 ±5 nm LEDs (2x).
Min. Print Contrast:
Minimum 25%.
Symbologies Supported:
1D: All major codes
2D: PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal Dutch Postal (KIX).
Communication
Bluetooth®:
Bluetooth® Version 2.1.
Bluetooth® Frequency Range:
2.4 – 2.4835 GHz.
Bluetooth® Profiles:
SPP Profile, HID Profile, Apple iAP.
Bluetooth® Power:
Class 2.
Bluetooth® Range4:
30m.
Bluetooth® Pairing:
PIN, Simple Secure Pairing, NFC OOB Pairing.
Peripherals and Accessories
External interface:
MicroUSB connector for battery charging, and USB connectivity.
USB operating modes:
Tethered for real time data capture in conjunction with SmartWedge software. Download of stored scan data.
Optional accessories:
2136 4-Slot Desktop Battery Charger
Regulatory
Regions
EU (CE), USA (FCC) and more (see datasheet for details)
FCC ID
S6J1153
EMC
EN 55022:2010
EN 55024:2010
EN 301 489-1 V2.2.0RF
EN 300 328 V2.2.0
EN 302 208 V3.2.0
EN 301 489-3 V2.2.1
EN 301 489-17 V3.2.0
47 CFR Part 15C 15.247Electrical Safety
IEC 62368-1:2018
EN 62368-1:2020 +A11:2020
Laser Safety
(Imager Variants Only)IEC 60825-1:2014, EN 60825-1:2014
IEC 62471:2006, EN 62471:2008
21 CFR 1040.10Environmental
2011/65/EU (RoHS 2)
Restriction of the use of certain Hazardous Substances in electrical and electronic equipment
2015/863 (RoHS 3)
Amendment to Annex II of 2011/65/EU
2173 Bluetooth® Wearable HF/LF RFID Reader – includes battery, micro USB cable and USB charger Variant Part Number 2173 Wearable Bluetooth® LF/HF RFID Reader, no Imager
2173-BT-LF-HF-A1
2173 Wearable Bluetooth® LF/HF RFID Reader with 2D Imager
2173-BT-LF-HF-IMG
2173 Wearable Bluetooth® LF/HF RFID Reader, PI Card (HID Prox and iCLASS) Reading, no Imager
2173-BT-LF-HF-A1-PI
2173 Wearable Bluetooth® LF/HF RFID Reader, PI Card (HID Prox and iCLASS) Reading, 2D Imager
2173-BT-LF-HF-IMG-PI
2173 Wearable Bluetooth® Barcode Scanner with 2D Imager, USB
2173-BT-IMG
Accessories: 4-Slot Battery Charger, including PSU 2136-01-4WMS-CHG Spare Battery, Rechargeable Lithium Polymer – for 2173 HF/LF Reader 2173-00-BA-1000