1134 Low Frequency RFID Reader for Motorola MC55/65/67
**Please note that this is an End of Life (EOL) product and only available by special order. Please contact TSL to discuss your requirements**
This snap-on peripheral provides the Motorola™ MC55, MC65 and MC67 with dual LF support at 125kHz and 134.2kHz. The LF RFID reader is powered from the Motorola terminal and houses both the RFID reader and the antenna. The Motorola MC55/65/67 retains the original laser bar code functionality as well as the original communications platform housed within the terminal. The reader remains compatible with existing MC55/65/67 accessories such as the single slot cradle and car charger.
The LF RFID reader provides the ability to read and write to a wide variety of manufacturer specific transponders including NXP (Philips) HITAG, EM Microelectronic and Texas Instruments.
Now also available for the US
Please note: Use of this snap-on with the MC65 requires OEM OS version 2.40.0211 or higher – please update terminal before using accessory.
Performance Characteristics RF Transmit Frequency 125kHz, 134.2kHz Supported RFID Standards ISO 11784, ISO 11785,
ISO 18000-2Supported Tag-ICs : – NXP HITAG 1, HITAG 2, HITAG S
– Sokymat Q5
– EM Microelectronics EM4x02, EM4x05 (ISO FDX B), EM4x50
– Texas Instruments 64bit Read Only, 64bit Read Write, 1088bit MultipageTypical read time (serial number only) HITAG 2 – 30ms
HITAG S – 59ms
EM4002 – 65ms
EM4005 – 58ms
EM4050 – 95ms
Q5 – 55ms
Texas Instruments – 93msHost interface Serial interface on COM2 of MC55/65/67, ASCII or Binary Protocols 9600bit/s to 115200bit/s 8,N,1. Reading distance Dependent on transponder type and antenna. Typically up to 8cm for Texas Instruments 32mm glass, up to 6cm for EM4102 30mm diameter disc. Current consumption < 100mA during RFID read < 60mA in idle mode < 30mA in standby mode shutdown mode User Indication Red, Green LEDs Flash indicating activity (function may also be customised) Connection Interfaces Physical interface USB and power in to charge MC55/65/67 Reader power supply Powered from host terminal ActiveSync via USB Physical Characteristics Dimensions 85×100×30mm (3.35″x3.93″x1.18″) Weight 95g (3.35 oz) Enclosure material Polycarbonate Colour Black Material Finish Sparked Surface Mechanical Attachment Snap-on action Docking Attachment maintains dockability with Motorola docking cradle for charging and ActiveSync Environmental Operating Temperature -10°C to +50°C (14°F to 122°F) Storage Temperature -40°C to +70°C (-40°F to 158°F) Tumble 250 0.5m tumbles (500 drops) Drop specification 1.2m (4ft) to concrete Sealing IP54 Electrostatic discharge +/-15kV air discharge, +/-8kV direct discharge Construction RoHS compliant Supported Operating Systems Terminal Windows Mobile Supported OEM OS MC5590 6.1 3.38.0004 or higher MC5590 6.5 3.38.0004 or higher MC55A0 6.5 1.34.0005 or higher MC55N0 6.5 1.36.0017 or higher MC659B 6.5 2.40.0211 or higher MC67* 6.5 1.27.36 or higher Android** Compatible but not supported *MC67 is supported by TSL 1134 Readers with serial number 1134-
002000 or higher
**The accessory appears as serial port in Android. The serial protocol is available from the Product Downloads page (free, one time, registration required). For questions regarding using the serial protocol please email support@tsl.uk.com.Regulatory EMI/RFI EN 300 330-2, EN 301 489-3, FCC CFR47 Part 15(c), IC RSS210 Electrical Safety Europe – EN60950-1 with CB Scheme Group and National Differences
USA – UL60950-1RoHS: 2011/65/EU (RoHS 2)
Restriction of the use of certain Hazardous Substances in electrical and electronic equipment
2015/863 (RoHS 3)
Amendment to Annex II of 2011/65/EU**Please note that this is an End of Life (EOL) product and only available by special order. Please contact TSL to discuss your requirements**
1134-01-SO-MC65-LF-RFID – 1134 Low Frequency RFID Reader for Motorola MC55/65/67