User Guides

Traducción al español de la Guía de inicio rápido del Lector RFID UHF Bluetooth® 1128.

Spanish translation of the 1128 Bluetooth^® UHF RFID Reader Quick Start Guide.

User Guide for the 2128P Bluetooth^® UHF RFID Reader with ePop-Loq^® and High Gain Antenna

To maximise the battery life of TSL® Readers, the recommendations included in this document should be observed by both customers and distributors/resellers of TSL® products.

User Guide for the 2173 Bluetooth^® HF/LF RFID Reader

User Guide for the 1153 Bluetooth^® Wearable UHF RFID reader

User Guide for the 2128L Bluetooth^® UHF RFID Reader with ePop-Loq^® and High Gain Linear Antenna

Storage information specific to the battery contained in:

• 2128L UHF RFID Reader
• Power Handle for 2128 and 2128P UHF RFID Readers

To connect a TSL^® Reader to a desktop PC via a USB connection, the necessary Virtual COM Port (VCP) drivers must be downloaded from http://www.ftdichip.com/Drivers/VCP.htm. On that page you can select the appropriate 'setup executable' for your operating system, which will install the drivers for you.

This document provides a comparison of the two available modes of operation (SPP and HID) using Bluetooth^® Wireless Technology.

User Guide for the 2128 Bluetooth^® UHF RFID Reader

This document details Log file and Autorun file commands/responses that can be used with TSL®  Readers with a micro-SD card installed.

Document detailing the firmware version history of the 1128 Bluetooth^® UHF RFID Reader. Older firmware versions can be found in the 1128 Firmware Page

Document detailing the firmware version history of the 1153 Bluetooth^® Wearable UHF RFID Reader. Older firmware versions can be found in the 1153 Firmware Page

This document recaps the behaviour and operation of UHF transponders with respect to selecting, reading and writing, and provides some examples of how to achieve this with the TSL ASCII 2 Protocol.

It is often necessary to change the existing EPC of a tag to a new value to support either standards-based or custom encoding formats. This document provides examples of how to modify the EPC identifier using the TSL RFID Explorer App.

It is often necessary to change the existing EPC of a tag to a new value to support either standards-based or custom encoding formats. This document provides examples of how to modify the EPC identifier using the TSL ASCII 2 protocol.

Information on enabling Bluetooth^® Auto-Reconnect Mode on iOS Devices.

Document detailing the firmware version history of the 1166 Bluetooth^® Rugged UHF RFID Reader

This document details appropriate parameters for an Inventory command in a reader supporting the TSL ASCII 2 protocol (such as the 1128 Bluetooth^® UHF RFID Reader) to be used in the implementation of a “Tag Finder” operation.

This document describes how to update the Bluetooth® Firmware within a TSL^® UHF RFID Reader