User Guide for the 2128P Bluetooth^® UHF RFID Reader with ePop-Loq^® and High Gain Antenna

To connect a TSL^® Reader to a desktop PC via a USB connection, the necessary Virtual COM Port (VCP) drivers must be downloaded from http://www.ftdichip.com/Drivers/VCP.htm. Note that there is a setup executable on the same page, which will install the drivers for you.

This document provides a comparison of the two available modes of operation (SPP and HID) using Bluetooth^® Wireless Technology.

This document provides details of how to rapidly locate hard to find tagged items using TSL’s tag-finding Apps such as 'RFID Tag Finder' (available for Android™ and Windows Phone) or the Find-a-Tag feature in 'RFID Explorer for iOS'.

User Guide for UHF Smart Wedge ASCII 2 .NET for Windows Desktop.

UHF Smart Wedge ASCII 2 is a solution that converts UHF transponder reads and barcode scans from TSL^® ASCII Protocol UHF readers into keyboard presses. This enables UHF and barcode data to be scanned into legacy applications without any changes to the application.

The document describes the process of updating firmware to a TSL ASCII Protocol Reader.

RFID Web Wedge is designed to insert RFID (or bar-code) data into Web Applications

TSL’s mobile Apps now provide a feature to restrict the tags that are detected and displayed when performing an RFID scan. This can be used to ensure that only tags of interest to the user are detected and counted. This document details how to specify the EPC filter in TSL's mobile Apps.

This document describes how to pair a TSL^® Reader to a Windows 8.1 desktop computer via Bluetooth^® wireless technology. The process is similar for other desktop computers.

This document describes how to pair a TSL^® Reader to a Windows 7 desktop computer via Bluetooth^® wireless technology. The process is similar for other desktop computers.

Version 1.27 Fix for 2173 Bluetooth reset after download

Updated to support the ASCII protocol v2.4.
The install is now digitally signed.

UHF Smart Wedge ASCII 2 is a solution that converts UHF transponder reads and barcode scans from TSL^® ASCII Protocol UHF readers into keyboard presses. This enables UHF and barcode data to be scanned into legacy applications without any changes to the application.

v1.20 fixes a number of issues including reading from user memory

The User Guide can be downloaded here.

Added and updated many new Response Field Headers and Commands.

TSL® Readers can be operated in Bluetooth® SPP mode where the Reader is controlled by a custom written application or in HID mode, where the Reader behaves like a Bluetooth® Keyboard. This document details how to switch between these modes.

The TSL^® range of Bluetooth^® Readers are able to appear to host devices as an HID keyboard. In this mode the data read by the reader is sent to the host as if it were typed on the host’s keyboard.  This document describes the Bluetooth^® HID mode in more detail.

This document details Log file and Autorun file commands/responses that can be used with TSL®  Readers with a micro-SD card installed.

This document recaps the behaviour and operation of UHF transponders with respect to selecting, reading and writing, and provides some examples of how to achieve this with the TSL ASCII 2 Protocol.

It is often necessary to change the existing EPC of a tag to a new value to support either standards-based or custom encoding formats. This document provides examples of how to modify the EPC identifier using the TSL RFID Explorer App.

It is often necessary to change the existing EPC of a tag to a new value to support either standards-based or custom encoding formats. This document provides examples of how to modify the EPC identifier using the TSL ASCII 2 protocol.

Information on enabling Bluetooth^® Auto-Reconnect Mode on iOS Devices.

Information relating to submitting your TSL-hardware enabled apps to the App Store.

This document details appropriate parameters for an Inventory command in a reader supporting the TSL ASCII 2 protocol (such as the 1128 Bluetooth^® UHF RFID Reader) to be used in the implementation of a “Tag Finder” operation.

This document describes how to update the Bluetooth® Firmware within a TSL^® UHF RFID Reader

This Windows application connects to a TSL® RFID Reader (via a USB connection) in order to generate diagnostic information that can be emailed to our Support team. The Virtual COM Port driver must be installed in order for this application to function correctly.

V1.7 - Improved Bluetooth® and RFID tests. Please uninstall previous version before installing this one.

V1.4 - Further Bluetooth® and barcode engine tests added.

HID keyboard mapping file for French Belgian (BE) keyboard layout

HID keyboard mapping file for German (GR) keyboard layout

HID keyboard mapping file for French (FR) keyboard layout

v1.00 First release
v1.01 Fixed mapping for < >

HID keyboard mapping file for United Kingdom (UK) keyboard layout

HID keyboard mapping file for United States (US) keyboard layout

(NB This is the default layout and not normally required)

v1.5.0

New charging/low-battery indications on antenna LED's
Added .iv -at on|off to alert-by-tag (rather than end-of-round)
Added .iv -da on|off to alert on duplicate tags
Added .iv -dr rep to report and flag (DU:) duplicates
Added HID mode substrings
Added AF: antenna-firmware to .vr response
New reader bootloader scheme (2128P & 2128L uses BL4)
Other minor bug fixes

v1.4.0

New Singapore regulatory region "sga" (same as old "sg")
Old Singapore regulatory region "sg" region uses lower power (500mW)
Attached terminal can now charge even if reader battery has started flat
Other minor bug fixes

The document describes the process of updating firmware to a TSL ASCII Protocol Reader.

Version 2.7.0

In this release we introduce a Basic/Advanced mode toggle switch in the Settings.

All the functionality of the previous release is now available by switching to Advanced Mode but to provide a gentler introduction for new users, the App defaults to Basic mode.

Basic Mode consists of:
A simplified Inventory screen display
The functionality of the Read/Write screen is hidden to prevent accidental modification of tags.

This release also adds support for the 2128P and 2128L readers.

v1.3.1

Added option for Inverse 1D barcode setting
Removed obsolete Data Matrix Mirrored setting
Added support for new readers 2173 & 2166
UI improvements
Minor bug-fixes

v1.2.0

For ePop-Loq and USB OTG connected Readers:
- the Reader will automatically connect when attached
- the Option screen now includes controls to switch between SPP and HID modes.

The Reader clock can now be reset to the current time from the Options screen.
The Options page now provides the ability to change the mode of the ePop-Loq connector on compatible Readers.
The Select Reader screen list now provides images of available Readers.

3.3.1

This release provides support for using the built-in barcode scanner for Honeywell Android handheld devices such as the D75e, CT40, CT50, CT60 & EDA51. This feature uses the "Honeywell Android Data Collection Intent API" so may require an update to the Common_ES package on the device.

Tags with an existing EPC over 256 bits long can now be encoded.

Improved writing to small tags

This special version of RFID Tag Finder for Android, with the same feature set as the Play Store App, is able to connect to Readers with ePop-Loq^® connectors, such as the 2128 , 218P and 2166 UHF RFID Readers. Snap a terminal, in an ePop-Loq^® case, onto the Reader and the App will automatically launch, connect and be ready for use!

Note that there is no support for Bluetooth^® device connections in this version. This App can be installed along-side the Play Store (Bluetooth^®) version and will identify as "TSL ePL Tag Finder".

This v 2.3.0 release brings an update to the Inventory sample project to demonstrate two of the most requested features: continuous inventory and the recording of only unique tags.

In addition, the Rfid.AsciiProtocol-Library and all of the sample projects have been rebuilt using Android API Level 30 to meet the latest Google Play Store requirements.

The v1.6.0 release of the TSL iOS SDK is here! With a new FindTag Sample project (implemented in Swift/SwiftUI) and an updated framework supporting ASCII Protocol 2.5, this release is a significant upgrade to our iOS SDK.

New commands include:
TSLFindTagCommand (for series 21xx Readers) - controls the Reader's tag finder operation
TSLBlockPermalockTransponderCommand - to allow tags to be block permalocked
TSLAutorunCommand - allows the SD-Card's 'auto.txt' file to be read, written or deleted.

The latest TSLAsciiCommands framework is now available in the new XCFramework format for Xcode 12 users. We have also audited the API to improve type-safety in Swift apps.

Finally, the included documentation has been completely overhauled and now provides a fresh, modern look, an updated 'Getting Started' section, improved enum type documentation and both ObjC and Swift interfaces for all commands.

*The v1.6.1 update provides XCFramework ObjC project compatibility and minor documentation updates.

The Developer Resources Pack contains images of our readers, for use in applications developed to support our readers.   

Terms of Use
The images in this bundle and the rights pertaining to them, including copyright and ownership, are the sole and exclusive property of Technology Solutions (UK) Ltd 2020.  The images in this bundle are only provided for use in Mobile or Desktop applications that connect to the TSL Reader depicted in the image. No other use is authorised.

Welcome to the full release of the next major version of the Tsl.AsciiProtocol SDK for .NET Standard development. With this release we debut Reader Operations - an alternative API to simplify many of the  common RFID tasks such as Inventory, Scanning barcodes, Reading from and Writing to tags. We have also implemented a "Tag Finder" Operation, an oft requested addition to the TSL SDK.

The SDK ships with a multi-page, Xamarin Forms Sample Project, built to demonstrate the use of the ReaderOperations and AsciiTransportsManager API.

The Sample App supports Android, iOS, Windows UWP and Windows WPF.

This release uses the Tsl.AsciiProtocol.Std library v1.4.0 (available via NuGet) which contains many new features including:

• Full support for ASCII Protocol 2.5 - including the new FindTagCommand to simplify the implementation of tag finding.
• The new ReaderOperation API to help simplify RFID App development.
• USB support for UWP-based projects
• A new connection mechanism (AsciiTransportsManager) while retaining ReaderConnectionManager to maintain full backwards-compatibility with existing projects.
• Sequencing of synchronously executed ExecuteCommand() calls to eliminate cross-thread "Command is already executing" exceptions
• New Bluetooth pairing support via the BluetoothSecurity class allowing Apps to programatically initiate a pairing to a Reader
• HostBarcodeHandler - a helper class to initiate a scan on supported terminal barcode scanners. (Currently supports Honeywell, Zebra, Motorola, Symbol and Datalogic terminals)

The Tsl.AsciiProtocol.Std library is also designed to be backwards-compatible with Tsl.AsciiProtcol PCL library code to provide your project with a smooth transition to .NET Standard.

The release contains documentation in HTML format (Docs/HTML folder)

Open "Docs/HTML/Index.html" with your favourite browser and go to the Concepts Page where you will find information about TSL's APIs and the Getting Started guide.

The v1.2 release of the TSL cross-platform, Xamarin SDK (for PCL-based projects) is now available. This release uses the Tsl.AsciiProtocol PCL library v1.3.6 (available via NuGet) which contains many new features including:

• Full support for ASCII Protocol 2.5 - including the new FindTagCommand to simplify the implementation of tag finding.
• USB support for UWP-based projects
• A new connection mechanism (AsciiTransportsManager) while retaining ReaderConnectionManager to maintain full backwards compatibility with existing projects.
• Sequencing of synchronously executed ExecuteCommand() calls to eliminate cross thread "Command is already executing" exceptions
• New Bluetooth pairing support via the BluetoothSecurity class
• HostBarcodeHandler a helper class to initiate a barcode scan on the terminal from reader trigger for supported terminals

The Sample Projects, in this release, have all been updated to demonstrate USB support for UWP Apps and fix minor bugs. The new, cross-platform, .NET Standard SDK will be released shortly and we recommend that it is used for all new projects.